BIQU MicroProbe V2.0 Auto Bed Leveling Sensor, for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Voron/H2 Extruder BIQU B1 3D Printer with SKR Mini E3 V3.0, Octopus V1.1/Pro, Manta/SKR 3 Series Board

Brand: BIGTREETECH

Features:

• High Precision: BIQU MicroProbe V2.0 auto bed leveling sensor adopts electromagnetic components+photoelectric sensors chip, accuracy is 0.001mm Standard Deviation @24°C, 0.003mm Standard Deviation @60°C, compared to other auto bed leveling sensors, the accuracy is improved by 10 times
• Ultra Light and Small: BIGTREETECH Microprobe V2.0 is 25.3mm long and weighs 6g, which is 37% shorter and 40% lighter than 3D touch, BL touch/CR touch auto bed leveling sensors. it adds almost no weight to the extruder and upgrade high-precision auto leveling capability
• Durable and Long Lifespan: BIQU Microprobe V2.0 bed leveling sensor probe uses metal probe, makes itself wear-resistant and durable, removable and replaceable probing pin. With a long service life of up to 10,000,000+ probing tests, will be a perfect upgrade for your printer. Compatible with PEI/Sticker/Glass/Metal bed
• Wide Application: BIQU Microprobe v2.0 bed leveling sensor compatible with all motherboards that support Bltouch/CR touch, such as SKR MINI E3 V3.0/Octopus V1.1/Octopus pro/SKR V1.4 turbo/Manta M4P/M5P/M8P/SKR 3/EZ, Manta E3 EZ, Kraken..32 Bit V4.2.7,MKS Gen L Series (SKR MINI E3 V3.0+ Microprobe compatible Ender-3 printer firmware has been compiled and uploaded to Github).
• Easy Installation: BTT Microprobe V2.0 auto bed leveling sensor suitable for Ender 3/Ender 3 V2/Ender 3 Max, Voron SteathlBurner/Afterburer, RatRig VC3, BIQU B1/BX 3D Printer/H2 series Extruder(Please download the mounting bracket STL file from bigtreetech microprobe github:), comptabile with CoreXY, Vzbot, I3 3D Printers
• Notes: Microprobe works differently from BLtouch/CR touch, the firmware must be re-configured for Microprobe, If you have any problems during use, please tell us at the first time, we will give you a satisfactory solution

Details: BIQU MicroProbe v2.0 Auto bed leveling sensor offers a sleek,futuristic build with a stylish black finsh, featuring geometric car-inspired design elements and a slick indicator LED，suitable for all FDM CoreXY/I3 printers,such as Ender 3,Ender 3 V2,Ender 3 Max,Ender 5,Ender 5 pro,CR10,Voron Steathburner,EVA 3,BIQU B1,BIQU H2 Extruder,RatRig VC3...etc 3D priter.
Notes：
The wiring of MicroProbe is the same as BLTouch. but Microprobe works differently from BLTouch, the firmware MUST be re-configured for Microprobe, Failed to do so will result in un-recoverable hardware damage. It uses a 5V power supply, and its control signal line is compatible with both 3.3V and 5V.The detection signal line is an open-drain output, which requires a 10K pull-up resistor on the mainboard's signal line or setting the 10 as a pull-up input in the firmware. (For the Microprobe v2.0, the detection signal line requires a strong pull-up, as some chips have weak internal pull-up capabilities. Therefore, it is recommended to connect it to a port with an external pull-up resistor, For example, Z-STOP port.)
Product Parameters:
Product Name: MicroProbe
Total Weight: 6g
Voltage: 5V
Standby Current: 3mA
Maximum Current: 2A
Cable Length: 1.5 m Wiring: 5 pins, 1.25 mm Pitch
Working Chamber Temperature: ≤60°C
Accuracy: 0.001mm Standard Deviation @24°C Ambient, 60°C Bed,0.003mm Standard Deviation @60°C Ambient.
Lifespan: 10,000,000+
Compatibility: All FDM 3D Printers
Main Features:
1. Ultra small, fits into more places;
2. Lightweight design;
3. Easy installation;
4.Compatible with a wide range of FDM printers;
5. High precision and reliability;
6.Removable and replaceable probing pin.

Part Number: US6-1060000644

model number: BIQU Microprobe V2.0